The Xenet Camber is the most versatile sandal of the three models that we have today and it moves perfectly on asphalt and on roads, although you can also look for tickling in more difficult terrain. The sole is the Clivia by Vibram which, with a thickness of 8mm and its Morflex compound, guarantees comfort and a quick adaptation to the foot, as well as lightness, flexibility, great recovery capacity and good abrasion index. The closure is the same as in the asphalt model, a 20mm polypropylene nylon tape. and a pin buckle, with which you will get in a short time to have the sandals perfectly adapted to your feet. The footbed is the same as in the Epic, a microfiber that absorbs sweat instantly. To find your size you just have to measure your foot as follows: Place your longest foot on a sheet and, resting the heel on the wall mark on it, where your longest toe ends (obviously the sheet will also touch the wall), then measure in centimeters, precisely, up to the mark. Once you have the measurement and with the table that you will find in images you will have no problems locating your size. One thing to keep in mind is that, according to our size, the sandal will measure between 0.8 and 1.6 cm. more than our foot. The steps to follow to achieve a good fit are: The foot must be well centered, for this the heel strap must have the exact tension and not let our foot come out from behind or push it too far forward, then the strap of the instep (that of the buckle) must hug the foot well and the buckle will be located outside the instep. Finally, the closure has to be well tightened, this will leave the foot secure and prevent it from coming out in front. They can be cleaned with a damp cloth. Do not leave in the sun.